Journal of Material Sciences & Engineering

ISSN: 2169-0022

Open Access

Citations Report

Below are the list of articles published in Journal of Material Sciences & Engineering that have been cited by eminent researchers all around the world.

Fabrication of Length Tunable ZnO Nanowire Arrays and Investigation on Their Effect for Dye-Sensitized Solar Cells

Synthesis and Characterization of Poly O-Anisidine Nanoparticles and their Nanocomposite

Application of Acrylonitrile Butadiene Rubber for Management of Industrial Waste Silica

FEM Analyses of Friction Coefficient in Open Die Coining Process of Different Grain Sizes

Trapping of Alpha Particles and Radon using Epoxy/Poly Vinyl Acetate Blend Foam

Fretting Wear Behavior of Nano- Intermetallic Precipitates Al65Cu20Ti15 Amorphous Matrix Composite Prepared by Pulse Plasma Sintering of the Ball Milled Powder

Low- Frequency Dielectric Dispersion and Impedance Spectroscopy of Lead-Free Na0.5 Bi0.5 Tio3 (NBT) based Ferroelectric Ceramic

Aluminum Surface Treatment for Improved Bonding of Magnesium/ Aluminum Bi-Metallic Casting

Solution Treatment on Mechanical Properties and Microstructures of Al-Li-Cu Alloy

The Advance in Self-healing Scheme of Polymeric Materials

Effect of Electrode Material on Electrical Discharge Machining of DIN 1.2379 and DIN 1.2080 Surface

Characterization and Use of Egyptian Nubian Sandstone in the Ceramic Tile Industry

Graphene for Nanoelectronic Devices And Interconnects

Perspectives of controlled GeSi dots on prepatterned Si (001) substrates

Nanotechnology on Boiling Heat Transfer for a Next-generation Cooling Technology

Electric Breakdown Through Nano Dielectric Films

Hybrid Organic/Inorganic Materials Based on Functionalized Dendritic Polymers: Methods of Preparation, Applications and Future Prospects

Adhesive Strength and Toughness Improvement of Epoxy Resin Modified with Polystyrene B-Polybutadiene-B-Poly (Methyl Methacrylate) Block Copolymer

Optimization of Rotational Speed in the Growing of the Thin Film Using Sol Gel Method which is Prepared with Spin Coating

Phase Formation in the Region of laser Irradiation of Al2O3–TiO2–Y2O3 Oxide Eutectic Mixtures

Effect of Ferromagnetic Induced Inhomogeneity in Excess Conductivity of YBa2Cu3O7-d+x CoFe2O4 Composite

Effect of Microsize Particulates on Tribological Characteristics of Vinylester Composites under Dry and Lubricated Conditions

Effectiveness of Dicalcium Phosphate Dihydrate as Biocompatible Coatings on 316L and 316LN Stainless Steel

Effect of Bio Field Treatment on the Physical and Thermal Characteristics of Vanadium Pentoxide Powders

The Study and Simulation of the Electron Transport Phenomena on Bulk Hg1-xCdx Te Based on an Ensemble Monte Carlo Method

Structural and Dielectric Characterization of Nickel-Cobalt Oxide Nanocomposite

Compressive Strain Behaviour under Different Strain Rates in Multi-Walled Carbon Nanotubes-Polycarbonate Composites

Effect of Al2O3 Particles on Mechanical and Wear Properties of 6061al Alloy Metal Matrix Composites

An Outlook on Magnesium-Based Biodegradable Implants

Physical Metallurgical Studies of Zr-Rich U-Zr Alloys

Cold Gas Sprayed Stellite-6 Coatings and their Wear Resistance

Growth of Colloidal Nano-particles: New Biomaterials

Fining Technology of Al-50% Si Powder - A Material for Hermetically-Sealed Casing of Multichip Subsystem

Mechanical Behaviour of Pure Aluminum Processed by Constrained Groove Pressing

Effect of Bio Field Treatment on the Physical and Thermal Characteristics of Silicon, Tin and Lead Powders

Physical Characterization and Microstructure Evaluation of Titanium Dioxide Semiconductor Discs Processed with Binders

Removal of Methylene Blue from Coloured Effluents by Adsorption onto ZnAPSO-34 Nanoporous Material

Studies on Hepato and Renal Toxicity of Cadmium on Normal and Protein Malnourished Rats

Osteoinduction and Antiosteoporotic Performance of Hybrid Biomaterial Chitosan-Bioactive Glass Graft: Effects on Bone Remodeling

The Effects of Stacking Sequence Layers of Hybrid Composite Materials in Energy Absorption under the High Velocity Ballistic Impact Conditions: An Experimental Investigation

Processing and Characterization of Cockle Shell Calcium Carbonate (CaCO3) Bioceramic for Potential Application in Bone Tissue Engineering

New Study on Improved Performance of Paving Asphalts by Crumb Rubber and Polyethylene Modification

Electromagnetic Super - Compressibility

Positron Annihilation Study of ZnO Nanoparticles Grown Under Folic Acid Template

Enhanced Performance of Zinc Oxide Arrester by Simple Modification in Processing and Design

Bulk Compounding of PCL-PEO Blends for 3D Plotting of Scaffolds for Cardiovascular Tissue Engineering

Can Graphene Lead to Breakthrough in Boiling Heat Transfer?

Effect of Antimony on the Tensile Strength and the Morphology of Si Platelets in Recycled Aluminum Piston Alloys

Experimental Determination of Cooling Rate and its Effect on Microhardness in Submerged Arc Welding of Mild Steel Plate (Grade c-25 as per IS 1570)

Effect of Lanthanum Doping on the Microstructure Evolution and Intermetallic Compound (IMC) Growth during Thermal Aging of SAC305 Solder Alloy

Electronic Structure and Thermal Study of Ag3PS4 and Ag5PS4Cl2 from Direct to Indirect Energy Gap

Dielectric Properties and Crystal Structure of (Mg0.95Ni0.05)4(Nb1-Xtax)2O9 Ceramics

Comparative Study of the Effects of Diesel and Biodiesel Over POM, PPA and PPS Polymers Used in Automotive Industry

Effect of Nano Rubber Additions on Wear and Mechanical Properties of Epoxy Glass Fibre Composites

Atomic, Crystalline and Powder Characteristics of Treated Zirconia and Silica Powders

Synthesis, Characterization and Study of Photocatalytic Activity of Cadmium Magnesium Nano Ferrites

Evaluation and Diffusion Assessment for Surface Hardening Processes

Optimising the Yield of Silicon Carbide Synthesised from Indigenous Biomass Husk using Different Catalysts

Corrosion in Oil and Gas Industry: A Perspective on Corrosion Inhibitors

Effect of Bio Field Treatment on the Physical and Thermal Characteristics of Vanadium Pentoxide Powders

The Study and Simulation of the Electron Transport Phenomena on Bulk Hg1-xCdx Te Based on an Ensemble Monte Carlo Method

Structural and Dielectric Characterization of Nickel-Cobalt Oxide Nanocomposite

Corrosion Inhibition of Triazinedithoil for Aluminum Alloy in Hydrochloric Acid Solution

The Effect of Ball Size Diameter on Milling Performance

Dilatometric Study of Two based Aluminium Sheets

Overview on in Polymer-Nano Clay Composite Paper Coating for Packaging Application

Dynamic Analysis of a Straight Bevel Gear Composite Structure

Dielectric Properties and Crystal Structure of (Mg1-xCox)2(Ti0.95Sn0.05)O4 Ceramics

Structural Properties and Morphology of the Quaternary Semiconductor AgIn4GaTe8

Study of Plasmonic Resonance of Gold through Refractive Index

Animal Experiment on In vivo Galvanic Corrosion of SUS316L and Ti-6Al- 4V

Mathematical Modeling and Simulation of Coupling Parameters Transfers of Steam in a Membrane-Type Solar Still AGMD

Improving Tensile Strength of Polymer Blends as Prosthetic Foot Material Reinforcement by Carbon Fiber

Study of Cerium-modified Triazinedithiol Electrodeposited Nanofilm on Corrosion Protection for Aluminum Alloy

The Experimental Research on Special Polymerized Sulfur Composite- Impregnated Concrete and Cement Mortar

Modelling the Temperature Aging Effect on Tensile Fracture Load of Notched High Density Polyethylene Material Using the Planning Design Experiment Approach

Mechanical Properties of Samurai Swords (Carbon Steel) Made using a Traditional Steelmaking Technology (tatara)

Polyolefin from Commodity to Specialty

The Creep Kinetics of Sand Cast Zinc-Based Alloys No. 2, ACuzinc5, and ACuzinc10

Investigation of the Preparation and Characterization of Fe-doped TiO2 Nanoparticles

Flame Spray Synthesis of WO3 for No Breath Monitors

Cast Aluminum Composite Obtained by Using Ultrafine Carbon Raw Materials

Simulating Plant Metabolic Pathways with Enzyme-Kinetic Models Using a New Approach to Homotopy Perturbation Method

Effect of SiC Particles on Dielectrically Properties of Epoxy Reinforcement by (Bi-Directional) Glass Fiber

Fabrication of Functionally Graded Carbon Nanotube-Reinforced Aluminium Matrix Laminate by Mechanical Powder Metallurgy Technique - Part I

Daily Estimate of Pure Water in a Desalination Unit by Solar Membrane Distillation

Power Generation Using Piezoelectric Material

Investigations on Synthesis, Structural, Morphological and Dielectric Properties of Manganese Oxides Nanoparticles

Mechanical Performance of Cementitious Composites Reinforced with Pultruded Jute/Polymeric Matrix Fabric

Experimental Analysis for Lubricant and Punch Selection in Shear Extrusion of Aa-6063

Effect of Process Parameters on Roughness and Hardness of Surface and Dimensional Accuracy of Lost Wax Process Casting

Optimization of Mechanical Behaviour of AA 5083 Nano Sic Composites Using Design of Experiment

Evaluation of Biofield Treatment on Physical, Atomic and Structural Characteristics of Manganese (II, III) Oxide

Novel All Optic Logic Gates using 2D Photonic Crystal Structure

Laser Transmission Welding of Polycarbonate: Geometrical and Microstructure Characterisation of the Weld

Comparative Study on Antimicrobial Efficiency of AgSiO2, ZnAg and Ag-Zeolite for the Application of Fishery Plastic Container

Influence of Biofield Treatment on Physical, Structural and Spectral Properties of Boron Nitride

Effect of Pulsed TIG Welding Parameters on the Microstructure and Micro-Hardness of AA6061 Joints

Cryogenic Durability and Finite Element Analysis of Carbon Fiber Reinforced Composites

Change of the Physical Properties of Coloured High Density Polyethylene by Effect of Environment

Wear Behavior of Al-SiC-Cu Metal Matrix Composites Prepared by Stir Casting and Optimization by using Taguchi Method

The Production of Thermal Insulation by Waste Animal and Vegetable Fibres

Compact Modeling of Single Electron Memory Based on Perceptron Designs

Selection and Precise Application of Operating Parameters of Nd: YAG and Other Laser Sources for Material Processing

A Model-Based Experiment on the Prevention of Frost Heave in Canals using Soil-bags

Steel of Boron with Dual Structure for Automobile Screws, Reducing Manufacturing Costs and Environmental Impact

Stainless Steel for Dairy and Food Industry: A Review

The Co-Grinding of Z/Cao/Al(OH)3(Z=ZnO Or Zn4CO3(OH)6) Powder Compositions as Technique for Preparation of Sorbents

Emerging Analysis on the Preparation and Application of Graphene by Bibliometry

Ferrite Coating on Iron Particles in Aqueous Solution: Effect of Surface Functionalization

Ag/TiO2-SiO2 Sol Gel Nanoparticles to use in Hospital-Acquired Infections (HAI)

Investigation on Transient Thermal Responses on 316L Austenitic Stainless Steel and Low Carbon Ferritic Steel Welding Using Pulsed Nd:YAG Laser

Potential Impact of Biofield Energy Treatment on the Atomic, Physical and Thermal Properties Indium Powder

Armenian Theory of Relativity Letter

A Pilot Recycling of Plastic Pure Water Sachets/Bottles into Composite Floor Tiles: A Case Study from Selected Dumping Site in Ogbomoso

Assessment of Biomimetic Modification on a Novel Low Elastic Modulus TiNbHf Alloy for Dental Implants

Optimization of Process Parameters of Aluminum Alloy (Al-6082 T-6) Machined on CNC Lathe Machine for Low Surface Roughness

Organic Solar Cells and its Characteristics

Failure of an Inconel 718 Die used in Production of Hot Copper Direct Extrusion

Effect of Date Palm Seeds on the Tribological Behaviour of Polyester Composites under Different Testing Conditions

Effect of High Impact Loading on Nanoclay Reinforced Polypropylene

Low-temperature Heat Treatment (80°C) Effect on the Electrochemically Synthesized CuInTe2 Thin Films for Energy Harvesting Applications

The Effect on Extracting Solvents using Natural Dye Extracts from Hyphaene thebaica for Dye-sensitized Solar Cells

Influence of Waste Water used in Irrigation on the Physical Properties of Olive Oil in Palestine

Determination of Some Metallic Elements and their Effect on Physical Properties of Edible Olive Oil in Palestine

Two Binary Liquid Critical Mixtures Belong to Class of Universality

Simulation to Study the Effect of Carrier Concentration on I-V Characteristics of Schottky Diode

Engineering Assessment and Applications of Clays, Case Study on Middle Cretaceous (Wasia Formation), Riyadh, KSA

Direct Patterning with Femtosecond Laser for Fabricating Ge2Sb2Te5 Stamps and Imprinting of UV Resins

Experimental Investigation of the Influence of Burnishing Parameters on Surface Roughness and Hardness of Brass Alloy

Raman Spectroscopy of Iron Oxide of Nanoparticles (Fe3O4)

Electrocatalytical Oxidation of Methanol on (Zn or Cu/Natural Phosphate/Iron) Electrode

Polysulfone/Cellulose Acetate Butyrate Environmentally Friendly Blend to minimize the Impact of UV Radiation

Inhibition Effects of a DMPO Derivative on the Corrosion of Zinc-Aluminium Alloy in 0.1N Hydrochloric Acid Solution by OCP Method at Different Temperatures

Rheology Properties of Castor Oil: Temperature and Shear Rate-dependence of Castor Oil Shear Stress

Electrochemical Studies of Aluminium 7075 Alloy in Different Concentration of Acid Chloride Medium

Application of Gettering Process on the Improvement of the Structural and Mineralogical Properties of Tunisian Phosphate Rock

Critical Behavior of the Electrical Conductivity for the Binary Mixture of Water and Phenol

Visible Light assisted Photocatalytic Acitivity of Zinc Titanate in Presence of Metallic Sodium

Corrosion Studies of AA2024 in Sea Water using Sodium Benzoate as an Inhibitor

Analysis of Mechanical Behavior and Microstructural Characteristics Change of ASTM A-36 Steel Applying Various Heat Treatment

Experimental Investigation on Behavior of Friction Materials in Brake Liners

Microstructure Evolution and Mangnetique Proprieties of Nanocrystalline Fe60 Cu30Al10 Prepared by Combustion Processes

Determination of Optimum Post Weld Heat Treatment Processes on the Microstructure and Mechanical Properties of IS2062 Steel Weldments

An Overview of Welded Low Nickel Chrome-Manganese Austenitic and Ferritic Stainless Steel

Effects of PWHT on the Hardness and Fractured Microstructure of IS-103Cr1 Welded Joint

Obtainment of Sorbitol on Ferroalloy Promoted Nickel Catalysts

Organo-gelation using Microwave Heating Source: The Case of a Polyurethane Model Compound

Structural and Hydriding Properties of the LaZr2Mn4Ni5-AB3 Type Based Alloy Prepared by Mechanical Alloying from the LaNi5 and ZrMn2 Binary Compounds

Superabsorbent Polymer Gels based on Polyaspartic Acid and Polyacrylic Acid

High Temperature Oxidation Resistance of Ni22Cr11Al Bond Coat Produced by Spark Plasma Sintering as Thermal Barrier Coatings

Synthesis and Characterization of Polyaniline/Ignimbrite Nano-Composite Material

Translational Development of Biocompatible X-Ray Visible Microspheres for Use in Transcatheter Embolization Procedures

Universality of Graphene as 2-D Material

Fourier Transform Infrared Spectroscopy and Liquid Chromatography - Mass Spectrometry Study of Extracellular Polymer Substances Produced on Secondary Sludge Fortified with Crude Glycerol

Room Temperature Gas Sensing with Ultrathin Au Nanowires

Experimental Investigations on Thermal Properties of Coconut Shell Particles in DAP Solution for Use in Green Composite Applications

Drilling Process Design for Hybrid Structures of Polymer Composites over Titanium Alloy

Evidence of Point Pinning Centers in Un-Doped Mgb2 Wires at 20 K after HIP Process

Transition Temperature Behaviour in Pan Based Composite Materials with and without SIC Filler

Experimental Determination of Mechanical and Physical Properties of Almond Shell Particles Filled Biocomposite in Modified Epoxy Resin

Iron Oxide Nanoparticles Coated with Polymer Derived from Epoxidized Oleic Acid and Cis-1,2-Cyclohexanedicarboxylic Anhydride: Synthesis and Characterization

Self-Recovering Section of RPV Steel Radiation Embrittlement Kinetics as Indication of Material Smart Behavior

Poly(Itaconate) Derivatives, at the Air-Water Interface: Case of Poly(Monobenzyl) and Poly(Dibenzyl) Itaconate

Structural, Electronic and Magnetic Properties of Geometrically Frustrated Spinel CdCr2O4 from First-principles Based on Density Functional Theory

Scratch Wear Resistance of TiALN And AlCrN Coated EN-353 Steel

Removal of Cu (II) from Water Using Hydrothermally Synthesized Strontium Doped Zirconium Oxide Nano Adsorbents

Low Velocity Impact of Filament-Wound Glass-Fiber Reinforced Composite Pipes

Mechanical Behaviour of Skin: A Review

Using Flixweed Seed as a Pore-former to Prepare Porous Ceramics

Effect of Al2O3 Nanoparticles Doping on the Microwave Dielectric Properties of CTLA Ceramics

Fabrication and Testing of Pure and NaOH Treated Sisal Fibre Reinforced Bio-Composite

Review on Synthesis, Characterizations, and Electrochemical Properties of Cathode Materials for Lithium Ion Batteries

Magnetic Mirtazapine Loaded Poly(propylene glycol)bis(2aminopropylether) (PPG-NH2, MW_2000) Nanocarriers for Controlled Drug Release

Improvement in Tensile Strength and Microstructural Properties of SAW Welded Low Alloy Steels by Addition of Titanium and Manganese in Agglomerated Flux

Electrochemical Synthesis and Characterization of Cu2ZnSnS4 Thin Films

Partial Transformation and the Two-Way Shape Recovery Characteristics

Utilization of AGVs and Machines in FMS Environment

Synthesizing and Characterizing of a Novel Zr90Ni6Pd4 Bulk Metallic Glassy Alloy Obtained by Spark Plasma Sintering of Mechanically Alloyed Powders

Irradiated Jute Reinforced Polypropylene Composites: Effect of Mercerization and SEM Analysis

Investigation of the Flexoelectric Coupling Effect on the 180° Domain Wall Structure and Interaction with Defects

Characterization of Feal by Powder Metallurgy Route

Studying of Species Composition of Activators of Skin and Visceral Leishmaniasis in the South of Kazakhstan

Effect of Gamma Irradiation on Photoelectric Parameters of Double-Barrier Structure Based on Silicon

Mechanical and Thermal Properties of Short Arecanut Leaf Sheath Fiber Reinforced Polypropyline Composites: TGA, DSC and SEM Analysis

Mechanical Performance of Reinforced Concrete with Different Proportions and lengths of Basalt Fibres

Synthesis and Analysis of Natural Fibers Reinforcement of Synthetic Resins

Polarization Dependent Reflectivity and Transmission for Cd1-Xznxte/GaAs(001) Epifilms in the Far-Infrared and Near-Infrared to Ultraviolet Region

To Develop a Biocompatible and Biodegradable Polymer-Metal Composite with Good; Mechanical and Drug Release Properties

Polymer Electrode Material for Microbial Bioelectrochemical Systems

Large-Scale Bose-Einstein Condensation in a Vapor of Cesium Atoms at Normal Temperature (T=353K)

Influence of Annealing Temperatures on the Structural, Morphological,Crystalline and Optical properties of BaTiO3 and SrTiO3 Nanoparticles

Microstructure Evolution and Brazing Mechanism of Ti2SnC-Ti6Al4V Joint by Using Cu Pure Foil

Laser Cladding and Thermal Spray Coatings on Steel Pipe Serving the Oil and Gas Industry

Study of applying Melon from South Kazakhstan for Producing Melon and Fruit-Melon Concentrates

Editor Note: Journal of Material Sciences & Engineering

Effect of Overageing Conditions on Microstructure and Mechanical Properties in Al–Si–Mg Alloy

Computational Study on Molecular Structures of C20, C60, C240, C540,C960, C2160 and C3840 Fullerene Nano Molecules under Synchrotron Radiations Using Fuzzy Logic

Optimization of Reaction Parameters for Silver Nanoparticles Synthesis from Fusarium Oxysporum and Determination of Silver Nanoparticles Concentration

Synthesis of Graphene Oxide by Modified Hummers Method and Hydrothermal Synthesis of Graphene-NiO Nano Composite for Supercapacitor Application

Important Consequences of the Exponent 3/2 for Pyramidal/Conical Indentations-New Definitions of Physical Hardness and Modulus

Stress-Strain Characterization in Fiber-Reinforced Composites by Digital Image Correlation

Synthesis of Pyramid-Shaped NiO Nanostructures using Low-Temperature Composite- Hydroxide- Mediated Approach

Technology Geometric Decoration with Silver and/or Bronze Wires on Magnetite Patinas in the Armament of the Preroman Peoples of the Iberian Peninsula

Attenuation Performance of Polymer Composites Incorporating NZF Filler for Electromagnetic Interference Shielding at Microwave Frequencies.

Environmental Quality Assessment of Dairy Products Manufactured in the Area of Kazakhstan Aral Sea Region

Effect of Zinc Oxide Nanoparticles on Mechanical Properties of Diglycidyl Ether of Bisphenol-A

Reduction of Sulphur Content of AGBAJA Iron Ore using Hydrochloric Acid (HCl)

Analytical and Numerical Analysis of Functionally Graded Heat Conduction Based on Dirichlet Boundary Conditions.

Mechanical Behavior of Long Carbon Fiber Reinforced Polyarylamide at Elevated Temperature

Determining the Amount of Hydrogen in Thin Films Well Si1-xGex: H (X = 0 ÷ 1) for Electronic Devices

Counting the Relative Number of Hydrogen Bonds in Several Alcohol Co-solvated Systems via GROMACS

Effect of Temperature of Electron Beam Evaporated CdSe Thin Films

Enhanced Interlayer Coupling of CuO2 Planes Promote the Superconducting Properties of Cu0.5Tl0.5Ba2- YSrYCa2Cu3O10-δ (Y=0, 0.15, 0.25) Samples

Are Transition Metal-Rich Metallic Glasses Made Up of Distorted BCC Clusters?

Synthesis of Alumina Fibre by Annealing Method using Coir Fibre

Compression Fatigue Crack Growth in Nacre and Its Implication on the Mechanical Performance of Orthopedic Implants

Reduction of Sulphur Content of AGBAJA Iron Ore Using Sulphuric Acid (H2SO4)

Observation of Optical Properties of Gold Thin Films Using Spectroscopic Ellipsometry

Prediction of Geometry of Loop Formed on Terry Fabric Surface Using Mathematical and FEM Modelling

Synthesis of α-Al2O3 Nanopowders at Low Temperature from Aluminum Formate by Combustion Process

Microhardness and Adhesion Strength of PMC’s Coatings by NiCr Alloy

A Comparative Study of Three Different Microscale Approaches for Modeling Woven Composite Material

Pitch-Based Carbon Fibre-Reinforced PEEK Composites: Optimization of Interphase Properties by Water-Based Treatments and Self-Assembly

Study and Optimization of a Photovoltaic Mill System Functioning on the Course of the Sun

Surface Excess Free Energy: An Elaboration with Particular Insight for Use as a Predictor of Solvophilicity in Molecular Simulation

Recommendations for Compatibility of Different Types of Polymers with Potassium/Sodium Formate-Based Fluids for Drilling Operations: An Experimental Comparative Analysis

Low Hanging Fruit in Computational Molecular Dynamics Simulations with the Published OPLS-AA Force Field

Critical Polyalkane, Polyether, and Polysilicone Structure Differences: Consideration of Polymer Forces from the OPLS-AA Standpoint

Evaluation of Physico-Chemical, Thermal and Mechanical Properties of Sintered Graphite and Mesophase Formulations

Prediction of Hardness, Yield Strength and Tensile Strength for Single Roll Melt Spinning of 5083 Al-alloy Ribbons

Financing for Plants, Equipment and Operations for the Establishment of a Plant for the Manufacturing of Spheroidal Graphite Iron Castings for Automobile Industries

Study of the Adsorption of Bright Green by a Natural Clay and Modified

Effect of Partial Shear Connection on Strengthened Composite Beams with Externally Post-Tension Tendons

Optimization of Sustainable Cutting Conditions in Turning Carbon Steel by CNC Turning Machine

Evaluation of Mechanical Properties of Medium Carbon Low Alloy Forged Steels Quenched in Water, Oil and Polymer

The ISO Standard 14577 for Mechanics Violates the First Energy Law and Denies Physical Dimensions

The Free Energy of Solvation for N-Decane in Ethanol-Water Solutions

Preparation of a Photoactive 3D Polymer Pillared with Metalloporphyrin

Assessing Biaxial Stress and Strain in 3C-SiC/Si (001) by Raman Scattering Spectroscopy

Effect of Size, Temperature, and Structure on the Vibrational Heat Capacity of Small Neutral Gold Clusters

Investigation of Effect on Prefabricated Light Steel Structure Non-coating and Coating Using Transogard Zinc Chromate Paint after Exposed to Seawater

Synthesis and Crystallization Behavior of 3 mol% Yttria Partically Stabilized Zirconia (3Y-PSZ) Nanopowders by Microwave Pyrolysis Process

Enhancement the Mechanical Properties of Aluminum Casting Alloys (A356) by Adding Nanorods Structures from Zinc Oxide

Deterioration of Stainless Steel Corrosion Resistance Due to Welding

Effects of Heat Treatment on the Mechanical Properties of the Vanadis 4 Extra and Vanadis 10 Tool Steels

Removal of Chromium from Industrial Wastewater by Adsorption Using Coffee Husk

Synthesis and Characterization of Manganese (Mn) Doped Polyaniline

Development of Graphite-DNA Polymer Composites as Electrode for Methanol Fuel Cells

Effect of HF Welding Process Parameters and Post Heat Treatment in the Development of Micro Alloyed HSLA Steel Tubes for Torsional Applications

The Benefit of 3D Printing in Medical Field: Example Frontal Defect Reconstruction

Total Excess Lifetime Cancer Risk Estimation from Enhanced Heavy Metals Concentrations Resulting from Tailings in Katsina Steel Rolling Mill, Nigeria

Electrical Resistivity Change of SeTeAg Compositions to Thermal and Pressure as Stress

Design and Development of Composite Nonwoven Filter for Pre-filtration of Textile Effluents Using Nano-technology

Fiber Reinforced Composites - A Review

Wetting of Olivine Sand against Steel Alloys

Analysis of Enhanced Oil Recovery Methods Like Gas Injection in the Fractured Reservoirs and Optimize Its Efficiency

Dielectric Dispersion Characteristics of Unsaturated Sand Contaminated by Diesel

Recent Developments in Quantum Dots/CNT Co-Sensitized Organic Solar Cells

Challenge of Industrial High-load One-point Hardness and of Depth Sensing Modulus

Laser Induced Shock Wave Studies of Para and Ferro Magnetic Materials

Iriartea Deltoidea and Socratea Exhorriza: Sustainable Production Alternatives for Integrated Biosystems

Electrochemical Performance of Mn Doped Co3O4 Supercapacitor: Effect of Aqueous Electrolytes

Influence of Dopants on Mechanical Properties of Steel: A Spin-Polarized Pseudopotential Study

Proposed Link between the Periodic Table and the Standard Model

Size-Exclusion Chromatography and Its Optimization for Material Science

Melt Infiltration Casting of Alumina Silicon Carbide and Boron Carbide Reinforced Aluminum Matrix Composites

Layered Double Hydroxides: Tailoring Interlamellar Nanospace for a Vast Field of Applications

Synthesis of MgO Nanoparticles from Different Organic Precursors; Catalytic Decontamination of Organic Pollutants and Antitumor Activity

Taguchi Design of Internal Stress and Friction Measurements during Electrodeposition

Use of the Additive Based on Amorphous Silica-Alumina in the Adhesive Dry Mixes

Design and Manufacture of Optimized Continuous Composite Fiber Filament Using Additive Manufacturing Systems

Reduced Graphene Oxide Thin Films with Very Large Charge Carrier Mobility Using Pulsed Laser Deposition

Nanoparticle Shape and Thermal Radiation on Marangoni Water, Ethylene Glycol and Engine Oil Based Cu, Al2O3 and SWCNTs

The Effect of Grain Boundaries on the Elastic, Acoustical and Thermo- Physical Properties of Metal-Ceramics Composites

Low-Cycle Fatigue Behaviors of Pre-Corroded Q345R Steel under Wet H2S Environments

Effect of Siwak and Bamboo Fibers on Tensile Properties of Self-Cure Acrylic Resin Used for Denture Applications

Numerical Analysis of Fracture Behavior of Surgical Cement in THP

A Discussion of Non-Constant Creep Activation Energy

Thermodynamic Evaluation Using the Law of Mass Action under Consideration of the Activity Coefficients in the System NdCl3-HCl (or NaOH)-H2O-DEHPA-Kerosene

Tailored Spider Silk: The Future Solution to Biomaterials

Synthesis of Carbon Dots with Tunable Luminescence

Graphene/Fluorinated Graphene Systems for a Wide Spectrum of Electronics Application

Theory for Morphology Engineering of Solid Compounds (ATMESC): Facts, Predictions and Experimental Evidences

Wavelength and Constant Magnetic field Dependence of the Steady-state Photoconductivity of a Bifacial Silicon Solar Cell

Study the Effects of Spring Back on Sheet Metal Bending using Mathematical Methods

Preparation and Characterization of Artificial Spider Silk Produced through Microchannel Techniques

Demetallization of Nickel from Crude Oil using Aluminum Oxide (Al2O3) Nanoparticles Synthesized with Sodium Dodecyl Sulfate (SDS)

Silver Doping Effects on ZnTe Thin Films by Thermal Evaporation Technique

Evidence for the Essential Role of Myosin Subfragment-2 in Muscle Contraction: Functional Communication between Myosin Head and Subfragment-2

Density Functional Study of Electronic, Magnetic and Chemical Bonding Properties of Spinel CdCr2O4

Functional Honeycomb Based Composite Panels for Structural and Thermal Management Applications

Developing Polypropylene Bonded Hindered Phenol Antioxidants for Expanding Polypropylene Applications in High Temperature Conditions

Optimization of Thermal and Mechanical Properties of Unsaturated Polyester Resin as a Binder in Polymer Concrete for Manufacturing Precision Tool Machine Bases

Characteristics, Preparation Routes and Metallurgical Applications of LDHs: An Overview

Theoretical and Experimental Proof of Alkali-Metal Atom as Polar Atom

Nanofibers for High Efficiency Filtration

Effect of Heat Treatment of Cu-Al-Be Shape Memory Alloy on Microstructure, Shape Memory Effect and Hardness

Preparation of a Modified Micro-arc Oxidation Coating Using Al2OParticles on Ti6Al4V

Dilemma between Physics and ISO Elastic Indentation Modulus

Synthesis and Evaluation of Olivine Nanosheets from Layered Ammonium Iron Phosphate Monohydrate

Fatigue Resistance Study of Quenched and Tempered High-Strength Steel Submitted to Low Intensity Shot Peening Treatments with Different Types of Shots

The Effect of Cu on the Decomposition of Al-Zn-Mg-(Cu) Alloys

An Electrical Model for Off-Plane Nano Needle Array Electrodes in Intracellular Signal Measurement in Biological Environments

Improved Wear Resistance of Boron Steels by Subcritical Annealing and Hardening with Production Cost Savings and Lower Environmental Impact

A Study on the Effect of Surface Grinding on Chloride Induced Pitting Initiation of Austenitic Stainless Steel 304 under Thermal Insulation at Ambient Temperature

Effect of Durable Superhydrophobic FS/PS Using DCTES on Carbon Steel

29Si and 27Al MAS NMR Characterization of the Structural Evolution of a Lateritic Clay under Acidic and Alkaline Treatments

Structural, Optical and Antimicrobial Analysis of Nickel Doped HAp Synthesized by Solgel Method for Biomedical Applications

pH Triggered Curcumin Release from PMMA-AA Coated ZnO Nanoparticles for Excellent Anti-Gastric Cancer Therapy

Effect of Glass Fibers Stacking Sequence on the Mechanical Properties of Glass Fiber/Polyester Composites

Characterization of 3D Printed PLA/PCL/TiO2 Composites for Cancellous Bone

Eletroless Silver Coated Nanocenosphere/Polymer Composite for EMI Shielding Effectiveness

Synthesis of Chromium Doped Cobalt Oxide (Cr:Co3O4) Nanoparticles by Co-Precipitation Method and Enhanced Photocatalytic Properties in the Visible Region

Theoretical Approach Towards Rational Design and Characterization of Benzo[1,2-b:5-B’]dithiophene (BDT)-Based (A-D-A) Small Molecules of Relevance for High Performance Solar Cells

Vibration Study in Human-Car Seat System: Overview and a Novel Simulation Technique

Effect of Zirconium Doping on Oxidation of Single Crystal β-NiAl

Characterization and Analysis of Extraction Process-parameter of Pandanus tectorius (Screw-pine) Natural Fiber for Polymer Composites

Optimization of Moulding Technology of Polymer Concrete Used for Manufacture Precision Tool Machine Bases

Mechanism of Ultra-Fast Actin-Myosin Sliding Producing Cytoplasmic Streaming in Giant Algal Cell, Studied Using the Centrifuge Microscope

The Production of a Thin Wire of Ti-Nb-Ta-Zr Shape Memory Alloy for Medical Devices

Foundry Industry of Zimbabwe - The Present and Future

Review of Different Tactile Sensors Using Piezoresistivity Mechanism

Reversion of Martensite in 304 Stainless Steel Studied by Dilatometry and Calorimetry

Effect of Antibodies to Myosin Head on the Development of Rigor Tension and Stiffness in Skinned Muscle Fibers

Growth of Columnar Co3Pt Strucrure with Ru Buffer Layer at Room Temperature

Tuning Magnetic Properties of Thick CoFeB Film by Interlayer Coupling in Trilayer Structured Thin Films

Implications of the Link between the Periodic Table and the Standard Model

A Slotted Lotus Shaped Microstrip Antenna based an EBG Structure

Density of State Calculations for Tl3SbS3 and SbTeI

Enhanced Piezoelectric Response in Nanostructured Ni/PVDF Films

Manufacturing of Sheet Gasket using a Paper Making Process without Organic Solvents

Welding by Hot Forging of Two Carbon Steels for the Manufacture of Spanish and Japanese Weapons

Electrochemical Chelation and Reduction of Nitrate Ion on EDTA Modified Carbon Paste Electrode

Mechanistic Insight into the Carbon Dots: Protonation induced Photoluminescence

Characterization of Correlated Calcium Dynamics in Astrocytes in PCL Scaffold: Application of Wavelet Transform Coherence

Modern Wound Dressing Using Polymers/Biopolymers

Thickness Dependent Surface Topography, Magnetic Properties and Magnetic Domain Structure of Amorphous FeTaC Thin Films

Redox Active Polymer as a pH Actuator on a Re-Sealable Microfluidic Platform

Decay of Impurity Nano-inclusions of Cobalt in Silicon under the Influence of Thermal Annealing

Frequency Analysis of the Tool with and without Wear during Turning by Modal Analysis

Tuning Fiber Alignment to Achieve Mechanical Anisotropy on Polymeric Electrospun Scaffolds for Cardiovascular Tissue Engineering

In situ Formation of Metal Nanoparticles through Electron Beam Irradiation: Modeling Real Materials from First-Principles Calculations

First-Principle Calculation of Structural, Mechanical, Electronic and Magnetic Properties of Cobalt Sub Hydrides Co2H and Co3H

Unlocking the Potential in Aluminum can Revolutionize the World

The Effect of Protective Coatings using L-5A Type toward Corrosion Rate on Mild Steel Grade a Material (Case Study in Indonesia Warship)

Physical Characterization of Fibre Optic Cable using Simple Laboratory Stress Tests

Fabrication of Oil Palm Fibre Polymer Composite Panel: Impact of Hybridized Flame Retardant Formulations on Thermo-Mechanical Properties

Six Polymorphs of Sodium Chloride upon Depth-Sensing Macroindentation with Unusual Long-Range Cracks Requiring 30 N Load

Analysis of Strengthening Mechanisms in Nano-ODS Steel Depending on Preparation Route

Low Pressure Plasma Treatment of PET and PET/Elastane Fabrics

Identification of Organic and Inorganic Compounds as Sustainable Bioproducts in Eucalyptus camaldulensis, Salix alba, Albizia julibrissin Wood and Bark Extractives by Analytical Instruments

Hygrothermal and Mechanical Properties of Ceramic Bricks and Mortars

RC Beams Retrofitted by Ferrocement Laminates with Addition of Alccofine

Study and Characterization of Thermoelectric Material (TE) Bismuth Antimony Telluride

Introducing a New Cement Hydration and Microstructure Model

Manufacturing and Properties of Multifunctional Honeycomb Adsorbent with Volatile Organic Compound Adsorption and Catalytic Oxidation

Investigation of Interface Diffusion in Sputter Deposited Gd0.1Ce0.9O1.95 Thin Buffer Layers on Y-Stabilized Zirconia Crystalline Substrates for Solid Oxide Cells Applications

Vibrational and Thermal Properties of Ionic Conductors Type Pirochlore H1-xAgxTaWO6.nH2O

Effects of Limestone and Coal Bottom Ash on Setting Time of Blended Portland Cement (Ternary Cement)

Microstructural and Mechanical Properties of Spark Plasma Sintering of Ni22Cr11Al Powders Synthesized by Mechanical Alloying for Thermal Barrier Coating

Research on Shear Horizontal Waves in Bars of Rectangular Cross-Section

Optimization of Normalising Process Parameters to Enhance Machinability of 16MnCr5 Steel: A Study of Medium Sized Auto Parts Industry

Towards Understanding Citric Acid Derived High Quantum Yield Molecular Fluorophores: From Carbon Dots to Spherical Organic Nanocrystals

An Investigation into Failure of Starter Solenoid Spring

Boron Doped Graphene Oxide: Synthesis and Application to Glucose Responsive Reactivity

Electrospun Polyacrylonitrile Based Carbon Nanofibers: The Role of Creep Stress towards Cyclization and Graphitization

Dense Lamellar Scaffold as Biomimetic Materials for Reverse Engineering of Myocardial Tissue: Preparation, Characterization and Physiomechanical Properties

Improvement of the Mechanical Properties of 30MnB5 Wear-Resistant Steel by Subcritical Annealing and Water Quenching, Improving Its Life Cycle Analysis

Modelling Particle Size, Drug Loading and Release of BSA Encapsulated into PLGA Nanoparticles

Constitutive Modeling for High-Temperature Flow Behavior of W360 Hot Work Tool Steel

Effect of the Substrate Nature on the Structure and Optical Properties of Amorphous Silicon Nanoparticles Embedded into Porous Anodic Aluminum Template

Low Pressure Plasma Processing of Collagen Membranes for Anti-Cancer Drug Delivery

Synthesis of Hydro-Sodalite as a Heterogeneous Catalyst for Reaction Kinetics of Soybean Oil Trans-Esterification

Indirect Dating of a Cistern Located in a Roman Archaeological Site (1st Century BC and 1st Century AD) from a Steel Nail

Thermodynamical Calculation of Residual Air Pressure in the Working Chamber of a Circulation Setup

Manufacture of Reclaimed Fiber Non-Woven for Sound Absorption

Development and Evaluation of an Advanced Aluminum Alloy for Additive Manufacturing

Process of Diamond Surface Termination by Carboxylic and Amino Groups: A Quantum Mechanics Approach

Finite Element Analysis of Chemical Assisted Ultrasonic Machining Process to Investigate the Effect of Abrasive on Polycarbonate (UL-752) Glass and USM Tool

Contribution to The Knowledge of The Action of Boron in The Dual Structure of a Steel 30MnB5 by Means of X-Ray Diffraction

Structural and Morphological Properties of TiO2 Nanotubes Fabricated via Electro-anodization Process

In-plane Displacement Measurement for Analytical Strain Determination

Influence of Undoped and Cu+2/Fe+3 Codoped ZnO Nanoparticles on Enhanced Photocatalytic Evaluation Using Textile Dye

Role of Heat Treatment on Al2024/B4C/Graphite Hybrid Metal Matrix Composites

The Linearized Fourier Thermal Model Applied to Au Nanoparticles 1D and 2D Lattices under Intense Nanoseconds Laser Irradiation Pulses

Theoretical Study of the Effect of an Fe Interlayer on the Formation of Graphene on a Diamond (111) Surface

Analysis of Catastrophically Failed Industrial Bolt

Corrosion and Corrosion Inhibition of Mild Steel in Red Sea Water by EDTA

Response Surface Methodology for FCAW for Best Weld Condition on Desirability Function

The Electrical Heating Performance of Multi-Walled Carbon Nanotubes (MWCNT) Reinforced Mortar

Heat Treatment Simulation of the Formation of Idiomorphic Iron Carbides with Widmanstätten Structure Observed in Archaeological Steel Pieces more than 2000 Years Old Subjected to Incineration Processes

Glycerol Carbonylation with CO2 to Producing the Glycerol Carbonate over Metal Oxide Nanoparticle Catalyst and the Influence of Both the Calcination Temperature of the Catalyst and the Reaction Parameters

Effect of Two-Step Ion Implantation and Microwave Annealing on Dopants Activation in Silicon-Germanium

Progress in Net and Near Net Shape Manufacturing of Metallic Components using the Ohno Continuous Casting (OCC) Process

Effects of Inorganic Salts Addition on Na-montmorillonite Clay at High Temperature and High Pressure: Insights from Molecular Dynamics Simulation

Strain-Based Fatigue Damage Modeling of Plain Woven Glass/Epoxy Fabric Composites

Impedance Spectroscopic Studies of NiMgCuZn Ferrites

Design and Analysis of Bullet Resistance Jacket Projectile Penetration: Reviews

Conductivity, Structural and Thermal Studies on Electrospun PVA-PANILiClO 4-Sb2O3 Composite Nanofibers Polymer Electrolytes for Battery Applications

Damage Characterization Using Thermography of Composite Plates Subjected to Low Velocity Impact Loads

Statistical Process Control Applied in the Chemical and Food Industry

Facile Fabrication of Porous Open-Cell Polymer Structures from Sacrificial "Natural Templates" and Composite Resins

A Unified Determination of the Characteristics of Cubic Lattices

Synthesis of Activated Carbon/Chitosan Composites and Expanded Graphite for Symmetric Supercapacitor

Study and Characterization of Flexural and Tensile Properties of Hybrid Bamboo/Sisal Fiber Reinforced Epoxy Composite

Corrosion Mechanism of Mild Steel in Acidic Solution and Adsorption Thermodynamics in the Presence of Water Hyacinth Extract

Study on Recycling of Galvanic Sludge containing Copper for Pure Copper Production

Preliminary Study on Recovery of Nickel from Electro-Nickel-Plating Solution by Electrowinning

Mechanistic Modelling of Hydrogen Sulphide and Carbon Dioxide Corrosion of Pipes Conveying Petroleum Crude-Oil and Gas

Appearance of Recrystallization Maclas in an Archaeological Piece of Steel from the Northern Necropolis of Cordoba (Spain) (1st Century)

Electrochemical Study of the Hydrogenation of LaZr2Cr4Ni5-Based Alloys

Spark Plasma Sintering Techniques Improve the Properties of AlN-TiB2 Ceramics with Nb2O5, Y2O3 and ZrO2 as a Sintering Precursors

Empirical Relationship between Hardness and Tensile Strength for Medium Carbon Steel Quenched in Different Media

Study on the Mechanical Characterization of Composite Materials for Automotive Wheel Application

EDTA-Modified Carbon Paste Composite for Electrochemical Determination of Pb(II) Ions

The Assembly and Classification of the Elements Using the Roberts-Janet Nuclear Periodic Table

Comparative Life Cycle Analysis (LCA) Study on Two Wear-Resistant Boron Steels: RAEX450 and 30MnB5

Editorial Highlights for Journal of Material Sciences & Engineering

Determination of Degree of Compatibility of Novolak-Polybutadiene Blends

The Possibility of Utilizing the Composite Ferrites as Core Material for the Fabrication of Multilayer Chip Inductors

Recovery of Metals from Dry Shot Blast Waste Generated in the Stainless-Steel Production Process

Past Conference Editorial of Materials Congress 2020

Design and operation of low energy consumption passive human comfort solutions

Phosphorous-jointed epoxidized soybean oil and rice husk-based silica as the novel additives for improvement mechanical and flame retardant of epoxy resin

Deformation of magnesium alloys for lightweight structural applications

Pore size enhancement in TiO2 thin films and its effects on dye sensitized solar cells

Biocompatible polymer-exfoliated nanosheets with ultra-high drug loading as safe and efficacious cancer therapeutics

Fabrication of topologically anisotropic microparticles and their surface modification with pH responsive polymer brush

Organic semiconductors: A history, background, and emerging applications

Study on degradation of the new kinds of biodegradable Mg-Zn-Mn-Ca alloys used for vascular stent

Development of a Mg-Gd-Er-Zn-Zr alloy with ultrahigh strength and ductility via extrusion, pre-deformation and two-stage aging

Shape reversibility and diffusionless phase transformations in shape memory alloys

Extra-lightweight MgB2 composites aimed for future aircrafts and spacecrafts

Graphene-quntum-dots induced MnO2 with needle-like nanostructure grown on carbon wood as advanced electrode for supercapacitors

Shape and size effect of doped ZnO nanoparticles on their antimicrobial efficacy

Multifunctional biocatalytic submarine-like micromotors for directional vertical motion

The convergence of technologies generates convergence in the regulations

Past Conference Editorial of Biomaterial 2020

Development of New Medical Technologies: from Biomaterials to Medical Device â?? The Regulatory Considerations and Compliance

Intubation Box for Covid Patients: A Approach to reduce the infection of Medical Professional

Applications of Single Cell Raman Sorting Technology in Life Sciences

Theranostic NIR Probe for Amyloid-Imaging In Vivo and Attenuation of Amyloid - Induced Toxicity


Investigation of dehydrogenation of Ti-V-Cr alloy by using in-situ neutron diffraction

Role of Nanotechnology during Covid enigma

Nano targeted therapies loaded by curcumin against liver and breast cancer

Smart Textiles for Personalized Health Care

Uptake and Translocation of Zn, Mn, and Ce NPs by soybean (Glycine max (L.) Merrill plants

What controls the unusual melting profiles of small AuNPs/DNA complexes

Heterogeneous Catalysis: A Solution for Sustainable Society

A review of the designs and prominent biomedical advances of natural and synthetic hydrogel formulations

Electrospinning and bioactive compounds: the use of nanotechnology to tailor food ingredients

Synthesis, characterizations of nano ZnO powder and their potential use as thick film chemical sensor

Editorial note on nano technology 2020

Some Plants Extracts as Green Inhibitors to Mitigate the Corrosion of Mild Steel in H3PO4 Acid Solutions

Estimation of Hydrogen Production Rate by Corrosion of Aluminum Alloys in Aqueous Solutions

The interaction between CA199-His antigen and graphene-modified electrodes

Thermomechanical Tests Applied To The Characterization Of Green Polyurethane Foams

Bioethics Biotechnology & Biosafety- An Indian Perspective

Sunset Yellow voltammetric detection with graphene-modified electrodes

Nature Of Chemical Elements

Development of a new type of non-Portland Cement with significant low-carbon footprint.

Ionic Liquid Green Synthesis of CeO2 Nanorods and Nano-Cubes: Investigation of the Shape Dependent on Catalytic Performance

Flexible screen-printed electrodes with stone paper as a substrate for electrochemical detection of cancer biomarker.

Editorial Note for Journal of Material Sciences & Engineering

Elements of Antigen Introducing Cells can be Adjusted by Gold Nanoparticles Presentation: A Review Article

Nano Asphalt Production Using Microemulation and Sonication Method: Yield Optimization Using Surface Response: A Review Articlev

Design and Development of Smart Theranostics Platform Based on Enzyme Immobilized Magnetic Nanocomposite Hydrogel: A Review Article

Pico/Nano/Micro Drop Dispensing Platform Using Unique Disposable Cartridges for Non-Contact and no Cross Contamination Dispensing in Life Sciences and Industry: A Review Article

Materials Science and Engineering for Nanoparticles: A Review Article

Advanced Materials 2019: Scanning tunneling microscopy and spectroscopy of wet chemically synthesized porous graphene nanoribbons- Kaitlyn Parsons, University of Illinois at Urbana-Champaign

Advanced Materials 2019: Structural investigation of Si nanoparticles-carbon nanofiber composite as flexible anode for highrate lithium-ion batteries- Vahide Ghanooni Ahmadabadi, Deakin University

Advanced Materials 2019: The unit cell prediction of two-dimensional supramolecule by STUN-BH-DMD method and molecular dynamics simulation- Tsu-Hsun Hou- National Sun Yat-sen University

Emerging Materials Congress 2019: Preclinical safety of topically administered nanostructure lipid carriers (NLC) indicated for wound healing: biodistribution and toxicity studies- C. Vairo, BioPraxis Research AIE

Emerging Materials Congress 2019: Dielectric relaxation and ac conductivity of nano sized polyaniline-cobalt oxide composites- Narsimha Parvatikar- APS College of Engineering

Advanced Materials 2020- Alginate Sulfate Substrates Control Growth Factor Binding and Growth of Primary Neurons: Toward Engineered 3D Neural Networks

Advanced Materials 2020- Effect of milling on the Structural, magnetic and catalytic properties of zinc ferrite synthesized by microwave combustion method

Advanced Materials 2020- Graphene-based nanocomposite for lithium-ion batteries anodes

Advanced Materials 2020- New Opportunities in Sustainable Materials

Advanced Materials 2020- Effect of CeO2 Nanoparticles on Interface of Cu/Al2O3 Ceramic Clad Composites

Nano Asphalt Production Using Microemulation and Sonication Method: Yield Optimization Using Surface Response: A Review Article

Elements of Antigen Introducing Cells can be Adjusted by GoldNanoparticles Presentation: A Review Article

Editorial Note for Journal of Material Sciences and Engineering

Design & Development of Smart Theranostics Platform Based on Enzyme Immobilized Magnetic Nanocomposite Hydrogel: A Review Article

Pico/Nano/Micro Drop Dispensing Platform Using Unique Disposable Cartridges for Non-Contact & no Cross Contamination Dispensing in Life Sciences and Industry: A Review Article

Short Communication on Photon Mass

Cupola Furnace Design and Fabrication

Good Governance in Oromia: Challenges and Strategies (Major Cities in Arsi and East Shewa zone in focus, Ethiopia)

Advanced Energy Materials 2020 Conference | July 15-16, 2019 | Vienna, Austria

Zinc-Based Additives for Biofouling and MIC Protection: Fabrication Method for Long-Term Efficacy

An Unique Application of Pnccd X-Ray Detector in Material Characterization

Optical Techniques in the Determination of Pitch Lengths in the Cholesteric and Chiral Smectic C Phases

New Methods for the Determination of the Surface Physicochemical Properties and Glass Transition of Polyaniline in Conducting and Non-Conducting Forms by Using Igc Technique at Infinite Dilution

Role of Materials Science and Engineering in Metal Additive Manufacturing

Improvement and Enhancement of Enzyme Activity by Metal-Organic Framework (MOF) Adsorption

Novel Approach for Obtaining Nanocomposites with a High Percentage of Mwcnts Reinforcement and Elastomeric Materials PU/MWCNT

Thermodynamic Modeling of oxyhydrogen fueled combined cycle power plant

How a Table within Quantum Field Theory Results in Numerous Periodic Tables

Relevant Topics


tempobet giriş

tempobet giriş


tipobet yeni giriş adresi tipobet e yeni giriş tipobet güncel giriş adresi imajbet giriş adresi

mobilbahis giriş

arrow_upward arrow_upward