Withstand Earthquakes are Effective

Journal of Steel Structures & Construction

ISSN: 2472-0437

Open Access

Editorial - (2021) Volume 7, Issue 6

Withstand Earthquakes are Effective

Shin young Kwang*
*Correspondence: Shin young Kwang, Department of Civil and Environmental Engineering, Hanbat National University,Daejeon, South Korea, Email:
Department of Civil and Environmental Engineering, Hanbat National University,Daejeon, South Korea

Received: 01-Jun-2021 Published: 22-Jun-2021
Citation: Zang, Zhio. "Withstand Earthquakes are Effective ." J Steel Struct Const7 (2021) : 6
Copyright: Shin young K. This is an open-access article distributed under the terms of the creative commons attribution license which permits unrestricted use, distribution and reproduction in any medium, provided the original author and source are credited.


The fabrication of a building or structure that's ready to withstand the sudden ground shaking that's characteristic of earthquakes, thereby minimizing structural damage and human deaths and injuries. Suitable construction methods are required to ensure that proper design objectives for earthquake resistance are met. Construction methods can vary dramatically throughout the planet , so one must remember of local construction methods and resource availability before concluding whether a specific earthquake-resistant design are going to be practical and realistic for the region. There is a fundamental distinction between the planning of a building and therefore the construction methods wont to fabricate that building. Advanced designs intended to face up to earthquakes are effective as long as proper construction methods are utilized in the location selection, foundation, structural members, and connection joints. Earthquake-resistant designs typically incorporate ductility (the ability of a building to bend, sway, and deform without collapsing) within the structure and its structural members. A ductile building is in a position to bend and flex when exposed to the horizontal or vertical shear forces of an earthquake. Concrete buildings, which are normally brittle (relatively easy to break), are often made ductile by adding steel reinforcement. In buildings constructed with steel-reinforced concrete, both the steel and therefore the concrete must be precisely manufactured to realize the specified ductile behavior. Building failures during earthquakes often are thanks to poor construction methods or inadequate materials. In less-developed countries, concrete often isn't properly mixed, consolidated, or cured to realize its intended compressive strength, so buildings are thus extremely vulnerable to failure under seismic loading. This problem is usually made worse by a scarcity of local building codes or an absence of inspection and internal control . The most common tectonic quality of recent structures, like frame systems, is their flexibility; they're hospitable change. Although this characteristic may be a big advantage as compared to the inflexible masonry structures of the past, it'd also create some serious problems, such as e.g. the lack of safety within the event of an earthquake, if the pliability isn't used consciously by architects and interior designers. This article attempts to define and establish some rules for the inside design of buildings with ferroconcrete frame systems. The rules for creating subtractions from these structures and increasing them by making additions to them are contained within this text . The main objective of this text is to derive some ethical values from these rules. Thus, the conclusion of the article focuses on the derivation of some ethical values for achieving the earthquakeresistant interior design of buildings with ferroconcrete frame systems.

arrow_upward arrow_upward