GET THE APP

..

Journal of Civil and Environmental Engineering

ISSN: 2165-784X

Open Access

Nicholas Auyeung

College of Engineering, School of Chemical Biological and Environmental Engineering, Oregon State University, Corvallis, USA

Publications
  • Research Article   
    Cement Clinker based on industrial waste materials
    Author(s): Alpha Ousmane Toure*, Nicholas Auyeung, Falilou Mbacke Sambe, Jackson Scoot Malace and Fuqiong Lei

    The manufacturing of cement consumes energy and results carbon dioxide emissions. This work focused on producing cement clinker using coal fly ash (CFA), sewage sludge ash (SSA) and an industrial waste with a high content of calcium silicate (CS). Experiments were conducted to assume the use of a process that may consume less energy and raw materials that used in cement clinker manufacturing. The raw mixtures were prepared with lower clay and limestone contents than those used in Portland clinker manufacturing and then burned at lower temperatures, ranged from 1000 to 1200 °C. Due to the content of fluxes and mineralizers of the raw mixtures, this method could decrease carbon dioxide emissions from calcination up to 60% and energy consumption up to 350 kcal/kg of clinker. The free lime content of the clinker was found out by volumetric analysis and was consistent with free lime co.. Read More»
    DOI: 10.37421/jcde.2020.10.343

    Abstract HTML PDF

arrow_upward arrow_upward